Color: Silver, Red, Orange
1. There are two turning heads for cutting.
2. The cutting head can be positioned at 360 degrees in any direction.
3. Optional 8mm electric or pneumatic drill, rotation speed 1500-3000 RPM.
4. Minimum cutting radius: 12mm
5. Allowed cutting thickness: ordinary iron plate: 1.8mm, stainless steel plate: 1.2mm, copper and aluminum plate: 2mm, plastic plywood car: 2mm.
Sheet metal hole opener Instructions:
1. When using a Sheet metal hole opener, firstly insert the front end of the electric drill and the cutter into the round hole of the hole opener, make the cutter connect with the electric drill and lock it firmly, and then tighten the screws of the three branches and the cylinder head on the shelf to prevent the shelf of the hole opener from sliding; Insert the ruler rod into the small square hole of the shelf with the positioning needle from left to right. Finally, according to the size of the arc to be cut, adjust and screw the top screw tightly to fix the ruler rod firmly, so as to ensure the accuracy of cutting round hole.
2. When cutting standard circular arc, should use the thin plate hole opener, in order to ensure that the circular arc cut surface is smooth and beautiful, but also should be in the work of drilling a 3 mm positioning hole, drilling a 12mm hole, the tool head into the hole for the inside and outside of the cutting circle.
Use and maintenance:
1. The blade frequently refueling, especially cutting aluminum plate is particularly important.
2. First open the electric drill, then cut, and then exit and close the electric drill.
3. During cutting, the incision of the knife bar must be perpendicular to the workpiece to be cut to prevent hard and broken cutting head.
4. Replacement of knife bar: open the cover, take out the anti-loosening nut, loosen the setting screw, pull out the knife bar with pliers, reinstall the knife bar and tighten the screw.
5. Replacement of knife block: rotate the cap counterclockwise and replace it with a new knife block.
1 X Sheet Metal Cutter
1 X Wrench
Excellent quality! Cuts metal well. Delivery is very fast!
Excellent store. I recommend this seller. Thank you
I've bought one before. I use it for cutting trapezoidal sheets.
Many thanks to the seller and the delivery service ... The product matches the description. Satisfied with the product. I advise the seller.
It came quickly, its function performs, cuts good
It works well, the metal is chewing well.
Very well, arrived in a reasonable time
A good and functional product, I am very satisfied.
Tool is excellent quality! It is used for cutting metal with a thickness of not more than 1,5 mm in hard-to-reach places. Thank you very much! Shop recommend to everyone!!!
Fantastic very fast and as expected
Fast and well packed
Looks good. Everything is OK
I received the goods. The package is complete. Things are good
Thank you seller for fast shipping
Hey. thanks. cool stuff everything is as in the picture
receive good condition...thanks
Super practical and precise
Good quality. fast delivery.
Nice tool. I am satisfied. thank
receive good condition...thanks
Works, gnaws metal only sawdust fly.
Good product, punctual, recommended
perfect ... fast and good
The quality looks good! I recommend it to everyone!
Everything is fine!
Delivered and tested goods. Working perfectly.
A very decent and responsible seller. The product is fully consistent with the description. We sent the order quickly. And quickly delivered. I recommend the seller.
I Recommend the product & the seller !!! The product is very well made and beautiful. I am very satisfied with the purchase. The order arrived in good condition. As I said I recommend the product and the seller.
A+++++ SELLER HIGHLY RECOMMENDED,VERY FAST DELIVERY, THANKS !